Table of Contents Show
“Whether it’s a lockout violation, or a previous (heap leach) slide, or (an overland conveyor) belt slipping – you name it. They cover it up,” the operator, who asked not to be named, told The Northern Miner. “They’ve been known to pay workers who got injured on-site to stay at home and do computer-based training instead of doing the Workers’ Compensation Board (WCB) claim because it makes them look bad,” he alleges.
The Northern Miner hasn’t been able to independently confirm these claims.
Operations were suspended at Eagle, Yukon’s only producing gold mine, after the company reported that a failure at its heap leach pad caused an accident and spill that damaged some infrastructure. Damage was sustained to the pad’s embankment, piping, pumping, liner, conveyors and some electrical infrastructure, Victoria said in a news release Friday, its third since the accident. Victoria shares plunged more than 85% during the last week of June. The company’s market cap is now C$62.9 million. The mine is about 375 km north of Whitehorse.
Victoria acknowledged on Friday there’s no assurance it will be authorized to resume production or that it will have enough cash to repair the damage at Eagle, remediate the accident’s effects or restart production. The company has received notices of default from its lenders under a credit agreement from Dec. 18, 2020, it said last week. Its first quarter financial report this year states its debt payments total C$232.5 million as of March 31.
‘I braced for impact’
The operator, who has been working at Eagle for two years, says he was inside his bulldozer and on top of the leach pad around 5:30 a.m. on June 24. The primary leaching pad can accommodate as much as 90 million tonnes of ore, and about 38.9 million tonnes was stacked on the pad since production started, Victoria said Friday.
A haul truck was driving on the pad towards him, when he felt the ground move and saw to his right that the ore under the pad was splitting and cracking, he says.
He tried reversing the bulldozer, but the collapsing pad pulled him down.
“I needed to hold on because when I started sliding down the mountain it was very steep. I braced for impact and slid down the side of the mountain about 200 metres,” he said.
When his bulldozer stopped sliding, it was tipped 45 degrees on its side. He grabbed his backpack and cell phone and got out.
He tried clambering across the slope, but more gravel-size ore material slid down, almost burying him. He managed to clamber up to a small rock shelf. He radioed his supervisor and, fearing his crew was killed, was relieved to hear that everyone was accounted for.
He climbed further up the slope to a second shelf and sat down. When it began to slide, he continued climbing until he reached an intact part at the top of the pad.
‘Company didn’t ask’
Another supervisor radioed him and said he saw him on the pad, he says. An ambulance picked him up and drove him down to the main camp below. He was given light medical attention, though he said his injuries are minor. He’s not concerned about cyanide exposure because he said none of his skin made contact with the material.
“I was tossed around in the dozer,” he said. “It was a violent ride on the way down. I smacked my head a couple times. I probably strained a muscle in my neck. I’m going for neck X-rays this week to make sure none of the vertebrae in my neck are injured.”
He wasn’t taken to a hospital and no one from Victoria Gold asked him if he was okay, he said.
The Yukon government reported a week earlier that one person sustained non-serious injuries in the accident, and two received first aid treatment. Victoria said in its release last Thursday that there were no injuries in the accident. The operator said he’s not aware of anyone else who was injured.
When he returned to his trailer and tried to text his family, he found the internet was cut, and most of the land lines. He eventually found a line in the office of a different department and reached his family.
Caused by over-leaching?
An investigation is ongoing to determine the accident’s cause and Victoria is cooperating with third party technical experts from the Yukon government and the First Nation of Na-Cho Nyäk Dun, it said on Friday.
While the operator acknowledges he’s not an engineer, he believes the accident was caused by excessive leaching of the ore and improper maintenance of the leach pad.
He claims that pipes carrying the cyanide-bearing solution throughout the pad would break and nobody fixed them. Cyanide is used to separate gold from ore.
“There’s no doubt in my mind that they got broken underneath all the weight,” he said. “And then once you break that big line, it’s just massive amounts of cyanide that would go in there.”
About 4 million tonnes of ore, representing about 10% of the total on the pad moved during the accident, Victoria said. Of that, about 2 million tonnes moved beyond the pad’s embankment.
Hundreds of layoffs
The operator said all staff were laid off on June 25 and 26, though Victoria hasn’t confirmed that. The mine employs about 500 people.
The Yukon government said last week that the company reduced on-site staff to 60 essential workers while water treatment and pumping of water into storage ponds was ongoing.
The operator is now at home in British Columbia, and has filed a WCB claim for neck injuries and post-traumatic stress disorder.
He received his latest pay from Victoria on Thursday, but said he’s missing almost 18 hours worth of pay.
“They shorted us a couple hours on the landslide day,” he said. “Everyone was supposed to work the next day. They never paid us for that day.”
He said he doesn’t plan to return to Victoria Gold.
“I’m going to take the summer to decompress,” he said. “I’m not myself. I’m not at the gym or trail running. I don’t know if I ever want to go back to mining.”
